Altecnic Brass Thermostatic Washroom Valve, 22mm Compression

  • RS-stocknr. 777-0365
  • Fabrikantnummer CA-RS/MX5222
  • Fabrikant Altecnic
Wetgeving en conformiteit
Land van herkomst: IT

Careflo Thermostatic Fail Safe Mixing Valve

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The mixcal careflo range has been designed for use in care homes and other premises required to provide a duty of care, especially to the young and elderly. The valve is designed primarily for single user outlets including wash basins, showers, baths and bidets but is also suitable for multiple outlet use.

Temperature adjust range: 30 - 50°C
Temperature control: ±2°C
Maximum hot inlet temperature: 85°C
Minimum temperature differential requirement for fail safe: 10°C
Maximum inlet temperature 85°C
Maximum working pressure 10 bar
Temperature adjustment 30-65°C
Body DRZ - chrome plated
Cartridge and Shutter Brass
Springs: Stainless steel
Seals: EPDM


The mixcal careflo fail safe valve has been designed to meeting the requirements of the latest National Health Service model engineering specification D08 and BS 7942:2000 for use in care homes

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Kenmerk Waarde
Connection 22 mm Compression
Body Material Brass
Maximum Working Pressure 10 bar
Connection Size 22mm
Maximum Set Temperature +50°C
Minimum Set Temperature +30°C
Thread Standard or Connection Type Compression
Temperature Setting Range +30 +50 °C
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
112,15 €
Related Products
For heating, sanitary and compressed air systems, pumps ...
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
High quality brass valves. Manufactured in accordance with ...
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
Compact, high quality valve gives durability and secure ...
Compact, high quality valve gives durability and secure isolation when activatedScrewdriver actuatedNickel plated or Brass finishManufactured from OT58 brassOT58 brass -chromium plated ballChrome plated brass ball, encapsulated between two high grade NBR seals, gives smooth operation and 100% reliabilityBS 864 ...
A 240V two port zone valve for use ...
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...