RS PRO Thermistor 50Ω, 10 (Dia.) x 5mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Inrush Current Suppressors

A range of PCB mounting metal oxide ceramic inrush current suppressors which when cold at initial switch on, present a high series resistance and limit current flow
As the devices warm the resistance progressively reduces to allow normal current to flow
The device quickly cools and returns to high resistance when the power is switched off
Suitable for switched mode power supplies, small electric motors, filament lamps, transformers etc

Caution

These suppressors are designed to run at elevated temperatures and need to be hot to achieve low continuous operating resistance. It is therefore important to allow for this when installing them in the circuitry.

//media.rs-online.com/t_line/L210667-01.gif
Specificaties
Kenmerk Waarde
Temperature Coefficient Type NTC
Thermal Time Constant 58s
Resistance @ 25 °C 50 Ω
Tolerance ±20%
Application Protection
Depth 5mm
Dimensions 10 (Dia.) x 5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +170°C
96 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4094 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,00
(excl. BTW)
2,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
2,00 €
10 - 49
1,74 €
50 - 99
1,55 €
100 - 249
1,41 €
250 +
1,13 €
Related Products
DO-35 packaged NTC thermistors designed for temperature measurement ...
Description:
DO-35 packaged NTC thermistors designed for temperature measurement and control in applications which demand cost effective reliability Typical applications include domestic appliances, automotive systems, data processing equipment and heating/ventilating/air conditioning controlThe hermetically sealed ...
P27 Series NTC thermistors from EPCOS are constructed ...
Description:
P27 Series NTC thermistors from EPCOS are constructed with a UL 94 V-0 flame retardant coating. These NTC thermistors have kinked, tinned copper wire leads with a lead pitch of 7.5 mm. Stable electrical characteristicsSolderable terminals in accordance with IEC ...
These devises can be connected in series (an ...
Description:
These devises can be connected in series (an open circuit being fail safe) so that several monitoring points may be applied to equipment using one detector circuitProbe type: insulated metal housing with M3 male threaded fixingSensor type: encapsulation PTC pellet ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these R-T curve (Resistance-Temperature) matched thermistors are small, high quality, epoxy encapsulated, precision devices. These epoxy coated interchangeable chip thermistors offer true interchangeability over wide temperature ranges, permitting the circuit designer to ...