EPCOS B57861S0103A039 NTC Thermistor 10kΩ

  • RS-stocknr. 152-7134
  • Fabrikantnummer B57861S0103A039
  • Fabrikant EPCOS
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: ID
Productomschrijving

NTC sensor elements are the functional basis for all kinds of NTC temperature sensors in all applications. TDK offers epoxy resin and glass-encapsulated elements for temperature ranges of up to 160°C and 300°C, respectively, as well as unleaded NTC chip thermistors for temperature measurement, e.g. in IGBT modules. These sensor elements, which are available with and without insulated leads, feature fast response times and very precise measurements.

Temperature measurement
Short response time
High measuring accuracy
Tight B value tolerances available
Epoxy resin encapsulation
PTFE-insulated leads of
silver-plated nickel wire,
AWG 30 (50 mm)
PTFE-insulated leads of
silver-plated Cu wire (19 x 0.07 mm),
AWG 28 (350 mm)
UL approval (E69802)

Specificaties
Kenmerk Waarde
Series B57861S
Temperature Coefficient Type NTC
Tolerance ±5%
Application Temperature Measurement
Maximum Power Rating 60mW
Length 2.41mm
Height 6.5mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
220 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,81
(excl. BTW)
4,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,81 €
10 - 24
3,41 €
25 - 49
3,24 €
50 - 99
3,08 €
100 +
2,93 €
Related Products
Positive temperature coefficient Thermistor is designed for general ...
Description:
Positive temperature coefficient Thermistor is designed for general purpose over-current, over-voltage, and direct over temperature protection. Applications in TV tube degaussing, choke and transformer protection, time delay, motor starting, liquid level sensors and overflow protection for oil tanks. Epoxy resin ...
P27 Series NTC thermistors from EPCOS are constructed ...
Description:
P27 Series NTC thermistors from EPCOS are constructed with a UL 94 V-0 flame retardant coating. These NTC thermistors have kinked, tinned copper wire leads with a lead pitch of 7.5 mm. Stable electrical characteristicsSolderable terminals in accordance with IEC ...
Positive temperature coefficient Thermistor is designed for general ...
Description:
Positive temperature coefficient Thermistor is designed for general purpose over-current, over-voltage, and direct over temperature protection. Applications in TV tube degaussing, choke and transformer protection, time delay, motor starting, liquid level sensors and overflow protection for oil tanks. Sensors for ...
From Epcos, the B57164 Series of leaded NTC ...
Description:
From Epcos, the B57164 Series of leaded NTC thermistors are an inexpensive components boasting a broad resistance spectrum. With a lacquer coated thermistor disk and tinned copper terminal wires, the B57164 series thermistor is ideal for applications in temperature compensation, ...