Fluke Test Leads, 20A, 1 kV ac/dc, 600 V ac/dc, Black, Red, 0.9m Lead Length
- RS-stocknr.:
- 249-2821
- Fabrikantnummer:
- PVLEAD3
- Fabrikant:
- Fluke
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Per stuk
€ 93,00
(excl. BTW)
€ 112,53
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 93,00 |
- RS-stocknr.:
- 249-2821
- Fabrikantnummer:
- PVLEAD3
- Fabrikant:
- Fluke
- Land van herkomst:
- FR
FLUKE Test Leads, Accepts 4mm Banana Plug Connection, 20A Current Rating - Pomona MC4 Series - PVLEAD3
Want to keep your solar panels in tip-top condition? Check them out with this set of two test leads from FLUKE. You can use them to connect a solar panel and an inverter for the troubleshooting and maintenance of PV systems. A maximum cable length of 0.9m means these test leads are flexible and give your room to maneouvre. With voltage ratings of 1kV AC/DC and 600V AC/DC, they're suitable for both low-powered and high-powered applications.
Features & Benefits
• Nickel-plated contacts are highly conductive, so deliver reliable performance
• Suitable for use in a wide operating temperature range between +5°C and +40°C
• Plug and socket connection makes assembly a cinch
• Current rating of 20A means they're widely compatible with standard electrical components
• Contrasting black and red sheaths let you easily distinguish between leads
• Suitable for use in a wide operating temperature range between +5°C and +40°C
• Plug and socket connection makes assembly a cinch
• Current rating of 20A means they're widely compatible with standard electrical components
• Contrasting black and red sheaths let you easily distinguish between leads
Applications
• Solar panels
• Photovoltaic modules
• Research and development
• Industrial automation
• Photovoltaic modules
• Research and development
• Industrial automation
What equipment can I use these test leads with?
They should be paired with solar clamp meters that accept 4mm banana plugs to ensure a snappy and secure setup.
’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Kenmerk | Waarde |
|---|---|
| Lead Length | 0.9m |
| Current Rating | 20A |
| Test Lead Type | 4 mm Connector Test Leads |
| Colour | Black, Red |
| Voltage Rating | 1 kV ac/dc, 600 V ac/dc |
| Connector A Gender | Plug, Socket |
| Connector A Orientation | Straight |
| Connector B Orientation | Straight |
| Contact Material | Nickel Plated Brass |
| Safety Category | CAT III 1000 V, CAT IV 600 V |
| Safety Category Voltage | 600 V, 1000 V |
| Safety Category Level | CAT III, CAT IV |
| Operating Temperature Range | 5 → +40 °C |
| Minimum Operating Temperature | +5°C |
| Maximum Operating Temperature | +40°C |
- RS-stocknr.:
- 249-2821
- Fabrikantnummer:
- PVLEAD3
- Fabrikant:
- Fluke
- Land van herkomst:
- FR
FLUKE Test Leads, Accepts 4mm Banana Plug Connection, 20A Current Rating - Pomona MC4 Series - PVLEAD3
Want to keep your solar panels in tip-top condition? Check them out with this set of two test leads from FLUKE. You can use them to connect a solar panel and an inverter for the troubleshooting and maintenance of PV systems. A maximum cable length of 0.9m means these test leads are flexible and give your room to maneouvre. With voltage ratings of 1kV AC/DC and 600V AC/DC, they're suitable for both low-powered and high-powered applications.
Features & Benefits
• Nickel-plated contacts are highly conductive, so deliver reliable performance
• Suitable for use in a wide operating temperature range between +5°C and +40°C
• Plug and socket connection makes assembly a cinch
• Current rating of 20A means they're widely compatible with standard electrical components
• Contrasting black and red sheaths let you easily distinguish between leads
• Suitable for use in a wide operating temperature range between +5°C and +40°C
• Plug and socket connection makes assembly a cinch
• Current rating of 20A means they're widely compatible with standard electrical components
• Contrasting black and red sheaths let you easily distinguish between leads
Applications
• Solar panels
• Photovoltaic modules
• Research and development
• Industrial automation
• Photovoltaic modules
• Research and development
• Industrial automation
What equipment can I use these test leads with?
They should be paired with solar clamp meters that accept 4mm banana plugs to ensure a snappy and secure setup.
’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Kenmerk | Waarde |
|---|---|
| Lead Length | 0.9m |
| Current Rating | 20A |
| Test Lead Type | 4 mm Connector Test Leads |
| Colour | Black, Red |
| Voltage Rating | 1 kV ac/dc, 600 V ac/dc |
| Connector A Gender | Plug, Socket |
| Connector A Orientation | Straight |
| Connector B Orientation | Straight |
| Contact Material | Nickel Plated Brass |
| Safety Category | CAT III 1000 V, CAT IV 600 V |
| Safety Category Voltage | 600 V, 1000 V |
| Safety Category Level | CAT III, CAT IV |
| Operating Temperature Range | 5 → +40 °C |
| Minimum Operating Temperature | +5°C |
| Maximum Operating Temperature | +40°C |