0375, Bridge for use with Terminal Blocks

  • RS-stocknr. 818-8426
  • Fabrikantnummer 0 375 07
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Jumper connection accessories

Busbars for screw and spring terminal blocks.
Automatic insertion front mounting, without screws.
Insulated and divisible.
Consecutive or alternate connection.

Specificaties
Kenmerk Waarde
Accessory Type Bridge Bar
For Use With Terminal Block
Series 0375
70 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
2,06
(excl. BTW)
2,49
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
2,06 €
20,60 €
*prijsindicatie
Related Products
A range of standard feed through DIN Rail ...
Description:
A range of standard feed through DIN Rail terminals with an easy to operate screw connection mechanism that can connect solid and flexible wires, with or without wire-end ferrules. The pluggable insulated cross connection system allows for time saving and ...
CLIPLINE VDFK series 2 part panel mount, feed-through ...
Description:
CLIPLINE VDFK series 2 part panel mount, feed-through terminal blocks for high current applications with a touch proof insulated housing. This CLIPLINE VDFK panel mount terminal block has a screw wire connection on the front (0.2-6mm2 solid wire, 0.2-4mm2 stranded ...
The UT screw terminal block series from Phoenix ...
Description:
The UT screw terminal block series from Phoenix Contact combines the advantages of screw connection technology with the benefits of spring-loaded contacts. • Each terminal point supports large surface labelling• Standardized disconnect zone for the use of component plugs• Two ...
W series stud terminals available in single or ...
Description:
W series stud terminals available in single or double studs from M6 to M16 accepting up to 300 mm² cables. Manufactured from self-extinguishing polyamide UL94V0 and supplied with nut and spring washer. • Double studs with integral partitions• Easily cross ...