RTD, TC Temperature Transmitter, 7.5 → 30 V dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

5437 HART 7 Single Input Temperature Transmitter

PR Electronics 5437 single input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 4 input terminals allowing measurement of two, three or four wire RTDs. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.

Sensor Inputs

The PR 5437 provides unrivalled input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.

Installation Characteristics

Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.
1/4” centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.
Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.
Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.
Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.

Features and Benefits

• LED provides visual notification of sensor, transmitter, and loop status
• HART 7 and HART 5 communication protocols
• Sensor drift detection maintains measuring point reliability
• Flexible input capability, with choice of output modes
• Superior accuracy ensures true, reliable measurements
• Fast response time easily supports safety and cost-critical applications
• Very low temperature coefficient ensuring maximum accuracy across changing ambient conditions
• High galvanic isolation (2.5 kVAC / 55 VAC) providing protection from ground loops, high voltage transients and common mode interference
• Runtime meters provide a valuable history of the process temperature and the ambient temperature around the transmitter

5437D1

The 5437D can be mounted in zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I, Division 1, Groups A, B, C, D.

Specificaties
Kenmerk Waarde
Input Type Linear Resistance, Potentiometer, RTD, Thermocouple, Voltage
Supply Voltage 7.5 → 30 V dc
Diameter 44 mm
Minimum Temperature Input -200°C
Maximum Temperature Input 850°C
Minimum Operating Temperature -50°C
Maximum Operating Temperature +85°C
Series 5437
Depth 20.2mm
Hazardous Area Certification ATEX
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
338,00
(excl. BTW)
408,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
338,00 €
Related Products
Wika T-15 range of digital temperature transmitter specifically ...
Description:
Wika T-15 range of digital temperature transmitter specifically designed for Pt100 and Pt1000 sensors. The T-15 combines the known quick response of an analogue transmitter with the flexibility of configuration by means of PC.Due to its flexibility and reliability the ...
PR Electronics 2914 2-wire room temperature transmitter is ...
Description:
PR Electronics 2914 2-wire room temperature transmitter is a complete sensor and transmitter in a slim cabinet design. A precision PT100 sensor with small mass is mounted on the transmitter input, therefore achieving a fast response time. Suitable as a ...
In-head analogue temperature transmitter housed in a standard ...
Description:
In-head analogue temperature transmitter housed in a standard DIN connector blockRe-rangeable via solder links and potentiometersOperating Temperature Range: 0°C to +70°CDimensions: H32mm x Dia 42mm.
The transmitter has user selection of thermocouple typeRe-rangeable ...
Description:
The transmitter has user selection of thermocouple typeRe-rangeable via solder links and potentiometersOperating Temperature Range: 0°C to +70°CDimensions: H23mm x Dia 42mm.