Sensirion SHTW2, Temperature & Humidity Sensor -40 → +125 °C ±0.4 (Temperature) °C, ±3 (Humidity) %RH

  • RS-stocknr. 123-7353
  • Fabrikantnummer SHTW2
  • Fabrikant Sensirion
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

SHTW2 Flip-chip Humidity and Temperature Sensor

The Sensirion SHTW2 is a digital humidity and temperature sensor in a tiny WLCSP4 flip-chip SMT package. A complete sensor system is contained within a single chip, and includes a capacitive humidity sensor, a bandgap temperature sensor, analogue and digital signal processing circuits, calibration data memory and a digital interface which supports I2C fast mode communication. The low power consumption and 1.8V operating voltage make this device ideal for mobile or wireless applications where space and available power is limited.

Operating supply voltage 1.8V
Idle state current 0.7uA, average operating current 4.8uA
Humidity measurement range 0 to 100 %RH, typical accuracy ±3 %RH
Temperature measurement range -30 to 100 °C, typical accuracy ±0.4°C

Temperature & Humidity Sensors, Sensirion

Specificaties
Kenmerk Waarde
Sensor Function Temperature & Humidity
Output Type Digital
Interface Type Serial-I2C
Accuracy ±0.4 (Temperature) °C, ±3 (Humidity) %RH
Mounting Type Surface Mount
Pin Count 4
Operating Temperature Range -40 → +125 °C
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 1.62 V
Maximum Operating Supply Voltage 1.98 V
Package Type Flip Chip
Length 1.34mm
Height 0.42mm
Width 0.77mm
Dimensions 1.34 x 0.77 x 0.42mm
Resolution 0.01 (Humidity) %RH, 0.01 (Temperature) °C
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
2,57
(excl. BTW)
3,11
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 18
2,57 €
5,14 €
20 - 48
1,625 €
3,25 €
50 - 98
1,545 €
3,09 €
100 - 198
1,47 €
2,94 €
200 +
1,395 €
2,79 €
*prijsindicatie
Verpakkingsopties
Related Products
The HTS221 is a compact relative Humidity and ...
Description:
The HTS221 is a compact relative Humidity and Temperature Sensor. It includes a polymer dielectric planar capacitor structure sensing element and a mixed signal ASIC to provide the measurement information through digital serial interfaces. 0% to 100% relative humidity range ...
The DS1631/1731 are temperature-to-digital converters with over/under-temperature detection. ...
Description:
The DS1631/1731 are temperature-to-digital converters with over/under-temperature detection. Applications include PCs, mobile phones, office equipment and data loggers. Measurement temperature range: -55 to +125°CAccuracy: ±0.5°C from 0 to +70°C (DS1631), ±1°C from -10 to +85°C (DS1731)Programmable resolution from ...
The AD22100 series of temperature sensors with signal ...
Description:
The AD22100 series of temperature sensors with signal conditioning are low-cost, simple design monolithic temperature sensors with on-chip signal conditioning.Applications vary dependent on the type of sensor but include HVAC systems, board level temperature sensing and microprocessor thermal management.
TE Connectivity’s MEAS Ni1000SOT series of resistance temperature ...
Description:
TE Connectivity’s MEAS Ni1000SOT series of resistance temperature detectors (RTD) are miniature, low cost and high precision. Constructed from a silicon substrate with a PVD deposit, the structure is covered by a passivation layer whilst the nickel elements are mounted ...