The universal temperature controller KS 42-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
The KS 42-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.
This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
• BluePort® Front interface and BlueControl Software • Maintenance manager and error list • Automatic/Manual key • Monitoring of heating current and input circuit • Timer and programmer • Extended limit signalling function with latch • Type tested to EN 14597 (replaces DIN 3440), cULus and GL
PMA Temperature Controllers
Kenmerk
Waarde
Supply Voltage
90 → 250 V ac
Size
96 x 96mm
Number of Outputs
3
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Range
E5CC
Series
KS42
Input Type
Current, Resistance Transducer, Thermocouple, Voltage
The universal temperature controller KS 42-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
The KS 42-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.
This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
• BluePort® Front interface and BlueControl Software • Maintenance manager and error list • Automatic/Manual key • Monitoring of heating current and input circuit • Timer and programmer • Extended limit signalling function with latch • Type tested to EN 14597 (replaces DIN 3440), cULus and GL
PMA Temperature Controllers
Kenmerk
Waarde
Supply Voltage
90 → 250 V ac
Size
96 x 96mm
Number of Outputs
3
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Range
E5CC
Series
KS42
Input Type
Current, Resistance Transducer, Thermocouple, Voltage