Windows 7, Windows XP Temperature Control Software for use with Jumo Dicon Touch B703571.0

  • RS-stocknr. 823-9843
  • Fabrikantnummer Programmeditor-Programm DICON touch
  • Fabrikant Jumo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DICON touch - Process- and Program Controller Software

The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

Software for DICON touch controller
- Program Editor Software (stock-no.: 823-9843)
- Setup/Editor/Startup-Software (stock-no.: 823-9849)
- Evaluation and Visualization Software PCA3000 (stock-no.: 823-9846)

Specificaties
Kenmerk Waarde
For Use With Jumo Dicon Touch B703571.0
Operating System Windows 7, Windows XP
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
74,10
(excl. BTW)
89,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
74,10 €
Related Products
For recording, visualising, storing and analysing measured dataIntegrated ...
Description:
For recording, visualising, storing and analysing measured dataIntegrated lifecycle data management5" STN colour screen3 or 6 electrically isolated, freely programmable measurement inputs for thermocouples, resistance thermometers, current, voltageMinimum scanning rate 250 msData storage on CF memory card, e.g. ...
PC.doc-WORD can generate logs and lists using Microsoft ...
Description:
PC.doc-WORD can generate logs and lists using Microsoft WORDPC.doc-ACCESS can manage test data using Microsoft ACCESSCompatible with testing devices: METRATESTER 5-F/5-F-E, SECUTEST ..., PROFITEST 0100S-II, PROFITEST 204, PROFITEST C, METRISO C, GEOHM CCompatible with Windows 95/98/2000/XP and WORD 97/2000/XP.
The MPLAB® XC32 C/C++ Compiler is a full-featured, ...
Description:
The MPLAB® XC32 C/C++ Compiler is a full-featured, highly-optimized ANSI C compiler for all 32-bit PIC Microcontroller families. This compiler integrates into Microchip’s MPLAB X IDE, is compatible with all Microchip debuggers and emulators, and runs on Windows®, Linux ® ...
VisualDSP++® is an easy-to-use integrated software development and ...
Description:
VisualDSP++® is an easy-to-use integrated software development and debugging environment (IDDE). Efficiently manage projects from start to finish from within a single interface. Fully integrated user interface including project management, debugging, profiling, plottingSupports a variety of debug targets ...