Artesyn Embedded Technologies Embedded Switch Mode Power Supply SMPS, LPQ172-C, 5 V dc, ±12 V dc, 3 A, 5 A, 8 A, 30 A,

The Artesyn Embedded Technologies embedded switch-mode power supply from the LPQ172 series is a 110W rated, AC to DC plug-in device with 4 outputs. This AC power adapter has an outputs 1, 3 and 4 that are adjustable, along with adjustable, 4th floating output. This power supply has active power factor correction, a low output ripple and a built-in EMI filter. A cover is also supplied with this AC power supply. It has a universal input supply voltage rating range from 85VAC to 264VAC and 120VDC to 300VDC.
Note:
The 75W output power rating for this AC/DC power supply is based on a convection rating with a cover fitted, without which the rating would be 110W. The maximum 175W output power for this AC/DC power supply can only be obtained using a cooling fan giving 30cfm forced air, but with a cover fitted this would be 130W
Derating from 50°C to 70°C is 2.5% per °C

Built-in EMI filter
Efficiency of 75% typical at full load
Low output ripple
Output currents are 3A at 5V, 5A at 12V, 8A at -12V and 30A at ±5 to 25V
Overload and thermal overload protection
Overvoltage
Power fail and remote inhibit
Safety ground leakage current of 1.00mA at 50Hz to 60Hz, 264VAC input
Single wire current sharing
Standby output 5V

BABT
BABT: EN60950/BS7002
CB
CISPR 22 class B conducted
CSA 22.2-234 level 3
CSA certified
EMC compliance to FCC class B conducted
EN55022 class B conducted
EN61000-3-2
IEC EN6100-3-2(Active power factor correction compliance)
NEMKO
NEMKO: EN 60950/EMKO-TUE (74 sec) 203
PT3 class B conducted
UL recognised
UL1950
VDE
VDE 0878
VDE: 0805/EN60950 (IEC950)

VDE; UL Recognised; CSA Certified; NEMKO; BABT