Murata, DLW31S, 1206 (3216M) SMD Common Mode Choke ±25% Wire-Wound 200mA Idc

RS-stocknr.:: 724-1680P
Fabrikantnummer:: DLW31SN222SQ2L
Fabrikant:: Murata

Murata, DLW31S, 1206 (3216M) SMD Common Mode Choke ±25% Wire-Wound 200mA Idc

2176 op voorraad - levertijd is 1 werkdag(en).

Toegevoegd

Prijs Per stuk (geleverd op een wiel) Quantities below 150 on continuous strip

€ 0,95

(excl. BTW)

€ 1,15

(incl. BTW)

Aantal stuks	Per stuk
50 - 99	€ 0,95
100 - 199	€ 0,83
200 - 499	€ 0,69
500 +	€ 0,62

RS-stocknr.:: 724-1680P
Fabrikantnummer:: DLW31SN222SQ2L
Fabrikant:: Murata

Datasheets

Wetgeving en conformiteit

Land van herkomst:: JP

Productomschrijving

Murata 1206 DLW31S Series SMD Common Mode Chokes

DLP31S series common mode choke coil chips with high impedance in a small package. The DLP31S series utilise ferrite material technology and film processing technology to give excellent performance at high frequency ranges and is suitable for differential signal line application.

Small size, low profile, SMD. 3.2x1.6x1.15mm (Tolerance: +-0.15mm)
High common mode impedance (550 ohm at 100MHz typ.) in small size
Suppresses high frequency noise that was unable to be suppressed with existing common mode choke coils
Suitable for differential signal lines like USB, because DLP31S does not provide distortion to high speed signal transmission due to its high coupling (coupling coefficient: 0.98 min.)

Applications

USB lines of PCs, peripheral equipment
LVDS lines of Note-PCs, LCDs
USB lines of digital AV equipment such as digital cameras

Murata SMD Common Mode Chokes

Specificaties

Kenmerk	Waarde
Maximum DC Current	200mA
Package/Case	1206 (3216M)
Length	3.2mm
Depth	1.6mm
Height	1.9mm
Dimensions	3.2 x 1.6 x 1.9mm
Tolerance	±25%
Maximum DC Resistance	1.2Ω
Series	DLW31S
Maximum Operating Temperature	+85°C
Inductor Construction	Wire-Wound
Minimum Operating Temperature	-40°C

RS-stocknr.:: 724-1680P
Fabrikantnummer:: DLW31SN222SQ2L
Fabrikant:: Murata