Reliance Water Controls Stainless Steel Stopcock, 1/2in

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IT
Productomschrijving

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Maximum temperature: 99゚C
Minimum temperature: -10゚C
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter

Approvals

WRAS Approved

Expansion Vessels

Specificaties
Kenmerk Waarde
Connection 1 1/2 in BSP Male
Body Material Stainless Steel
For Use With Cold Water, Hot Water
Operating Pressure 5bar
Connection Gender 1 Male
Pipe Size 1 1/2in
Operating Temperature Range -10 → +99 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
50,67
(excl. BTW)
61,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
50,67 €
5 - 9
49,11 €
10 +
47,52 €
Related Products
RS Pro Stainless Steel L and T Port ...
Description:
RS Pro Stainless Steel L and T Port Ball Valves used for controlling flow and are excellent choice for shut-off applications. These ball valves are durable and perform well even after long periods of time. Available in a variety of ...
RS Brand reduced-bore quarter-turn stainless steel ball valves ...
Description:
RS Brand reduced-bore quarter-turn stainless steel ball valves for the control of flow. Available in a variety of sizes. Reduced port, 1/4" - 3" (DN8 - DN80)W.P: 1000WOG (PN63)W.T: -20°C to 200°C (-4°F to 392°F)Investment castingBlow-out proof stemAnti-static device (option)Locking ...
RS Stainless Steel Screwed End Ball Valves for ...
Description:
RS Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" - 3" (DN8 - DN80)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceTapped and drilled mounting pad (option)TA-Luft approved (option)Length conform to DIN ...
The Festo VZFX angle seat is a 1-1/4in ...
Description:
The Festo VZFX angle seat is a 1-1/4in G connection pneumatic operated process valve is an innovative product made of a gunmetal process valve with stainless steel, brass and aluminium actuators for operating pressure up to 40bar. It is perfect ...