RS PRO Steel 18 Teeth Spur Gear, 36mm Pitch Diam. , 30mm Hub Diam. , 12mm Bore Diam.

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Steel Metric Spur Gears

RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems.

Features and Benefits

• Steel EN8 (080M40/080M46) or equivalent
• Tensile strength: 569N/mm2 (min.)
• 20° pressure angle

Note

SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width.

Standards

DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent

//media.rs-online.com/t_line/L745595-01.gif
//media.rs-online.com/t_line/LI745400-01.gif
//media.rs-online.com/t_line/LI745517-01.gif
Specificaties
Kenmerk Waarde
Module 2
Number of Teeth 18
Material Steel
Bore Diameter 12mm
Hub Diameter 30mm
Pitch Diameter 36mm
Face Width 20mm
18 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
17,05
(excl. BTW)
20,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
17,05 €
5 - 9
16,34 €
10 - 24
16,00 €
25 +
15,68 €
Related Products
Injection moulded acetal co-polymer mitre gears giving a ...
Description:
Injection moulded acetal co-polymer mitre gears giving a gear ratio of 1:1. Tensile strength 94N/mm2Hardness (Rockwell R) 110-120Pitch angle 45°, pressure angle 49° 48'Number of teeth 20.
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
Stainless steel spur gears providing a range of ...
Description:
Stainless steel spur gears providing a range of gear ratios. All gears are module 1.0. Made from SUS303 (JIS 4051) stainless steelTensile strength 510N/mm²Pressure angle 20°Dimension E 10mm.
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.