SUBCON-PLUS-PROFIB/AX Series, Phoenix Contact Male Spring Terminal D-sub Connector, 9 Way, Cable Mount

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: DE
Productomschrijving

SUBCON-PLUS Profibus

Can be used on all Profibus systems up to 12Mbit/s
When the optional terminating resistor is switched in, the output circuit is disconnected to aid fault finding by segmenting the network
Additional connection for a programming or service device
Spring terminal or screw terminal connector technology (...SC...)
Integral strain relief
Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)
Programming connection optional (...PG...)
Cable entry axial (...AX...)

SUBCON-PLUS D-Sub Bus Connector

From Phoenix Contact, this SUBCON-PLUS series Bus connector can be used on all Profibus systems up to 12 Mbit/s. The connector has a 9-posistion D-Sub with two cable entries, for additional connection of a programming or service device.
The D-sub Bus Connector also features a switch operated termination resistor, which when activated disconnects the output circuit to aid fault finding by segmenting the network.

Features and Benefits

• Spring terminal or screw terminal connector technology (...SC...)
• Integral strain relief
• Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)
• Programming connection optional (...PG...)
• Cable entry axial (...AX...)
• Mating Cycles: 200 min.
• Metal plated housing
• Protected to IP40

Application Information

PROFIBUS Fieldbus connecters are typically used for linking process controls and plant automation modules.

Note

2744377 SUBCON-PLUS-PROFIB/AX

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 9
Body Orientation Straight
Housing Material Metal Plated Plastic
Current Rating 100mA
Voltage Rating 50 V
Dimensions 31.5 x 58.2 x 17mm
Mounting Type Cable Mount
Series SUBCON-PLUS-PROFIB/AX
Depth 17mm
Width 58.2mm
Length 31.5mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
44,54
(excl. BTW)
53,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
44,54 €
25 - 74
34,69 €
75 - 199
32,96 €
200 - 399
31,31 €
400 +
29,76 €
Related Products
A 15 position, male D-SUB Bus connector from ...
Description:
A 15 position, male D-SUB Bus connector from Phoenix Contact that is easy to assemble due to the knurled screws. Designed for universal use, the D-SUB position can be changed through a reversible connection block. • High level of EMC• ...
These Coaxial contact inserts are for use with ...
Description:
These Coaxial contact inserts are for use with the FCI DW Series of D-Subminiature Connectors. A range of inserts that meet KNX Standard requirements.Note: the description of the inserts is given based on the central contact.
Tinned metal housing with laminated ribbing for the ...
Description:
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.
A range of Crimp and Solder Contacts for ...
Description:
A range of Crimp and Solder Contacts for use in empty D-Sub Plug and Socket shells, stock no. 719-5764 typically.Discrete wire size for the Crimp Contacts is 22-30 AWG.Solder Contacts have a Ø1.15 mm blind hole for the wire.