INA 30mm Bore Spherical Bearing, 353000N Radial Load Rating

  • RS-stocknr. 191-3877
  • Fabrikantnummer GE30-FW-2RS-A
  • Fabrikant INA
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required

Specificaties
Kenmerk Waarde
Bore Size 30mm
Outside Diameter 55mm
Static Radial Load Rating 353000N
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
87,23
(excl. BTW)
105,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
87,23 €
5 - 9
83,74 €
10 - 24
82,00 €
25 +
80,25 €
Related Products
SKF sealed deep groove ball bearings are versatile ...
Description:
SKF sealed deep groove ball bearings are versatile ball bearings that suit high and very high speeds, they will accommodate both radial load and axial load in both directions. The ball bearings need very little maintenance. SKF deep groove ball ...
INA housing units are available as plummer block, ...
Description:
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In ...
Spherical bearings use a ball manufactured from hardened, ...
Description:
Spherical bearings use a ball manufactured from hardened, ground, polished 100 CR6 steel. Fitted with a liner between the ball and raceSuitable for higher operational speedsMinimal maintenance required.
Spherical roller bearings are double row, self-retaining units ...
Description:
Spherical roller bearings are double row, self-retaining units comprising solid outer rings with a concave raceway, solid inner rings and barrel rollers with cages. The inner rings have cylindrical or tapered bores. The symmetrical barrel rollers orient themselves freely on ...