TE Connectivity, Duraseal Red Insulated Spade Connector, 6.35 x 0.8mm Tab Size, 0.3mm² to 0.9mm²

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Waterproof Duraseal terminals

Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.

TEConnectivity Crimp Receptacles

The TEConnectivity DuraSeal red insulated crimp receptacle is designed to terminate a tin-plated or bare copper stranded wire having insulation rated or at least 75C to a blade terminal. It will provide a splash-proof and strain relief connection.

Features and Benefits:

• Operating temperature ranges between -55°C and 125°C
• Heat-shrinkable
• Blade terminal: tin plated brass
• Insulated receptacle
• Gender: Male
• Free hanging mount

Applications:

• Tooling
• Installation

Certifications:

• UL approved

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Minimum Wire Size mm² 0.3mm²
Maximum Wire Size mm² 0.9mm²
Gender Female
Insulation Insulated
Colour Red
Tab Size 6.35 x 0.8mm
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 18AWG
Contact Material Brass
Termination Method Crimp
Contact Plating Tin
Insulation Material Nylon
Series Duraseal
51 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 1000
345,96
(excl. BTW)
418,61
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
345,96 €
0,346 €
*prijsindicatie
Related Products
FASTON 250 series Ultra-Fast fully insulated flag receptacle ...
Description:
FASTON 250 series Ultra-Fast fully insulated flag receptacle crimp terminals designed to prevent shock and electrical short circuits from exposed leads. The terminals are fully protected within a V-2 type 6/6 nylon housing. When mated the crimp flag receptacle and ...
PIDG insulated Faston 250 flag receptacle receptacle wire ...
Description:
PIDG insulated Faston 250 flag receptacle receptacle wire crimp terminals with a mating area interface of 6.35 x 0.81mm. These PIDG Faston 250 quick disconnect flag receptacle crimp terminals consist of a precision-formed metal wire barrel containing serrations which provide ...
FASTON 110/125 series Ultra-Fast fully insulated receptacle crimp ...
Description:
FASTON 110/125 series Ultra-Fast fully insulated receptacle crimp terminals designed to prevent shock and electrical short circuits from exposed leads by providing complete encapsulation to a tab and receptacle when mated. The housings of these FASTON 110/125 series Ultra-Fast receptacle ...
FASTIN FASTON 250 series quick connect crimp receptacle ...
Description:
FASTIN FASTON 250 series quick connect crimp receptacle terminals that offer speed of application and uniform reliability. These FASTIN FASTON 250 receptacle terminals share the same product technology as the FASTON 250 crimp receptacles which assure a stable electrical & ...