Wago 0.1 A Solid State Relay 3 Phase, AC/DC, DIN Rail, Transistor/Triac, 48 V dc Maximum Load

  • RS-stocknr. 180-3048
  • Fabrikantnummer 857-708
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.

Solid-state relay module, Nominal input voltage: 230 V AC/DC, Output voltage range: 0 … 48 VDC, Limiting continuous current: 0.1 A, 2-wire connection, Yellow status indicator, Module width: 6 mm

Specificaties
Kenmerk Waarde
Maximum Load Current 0.1 A
Series 857
Mounting Type DIN Rail
Minimum Load Voltage 0 V dc
Maximum Load Voltage 48 V dc
Minimum Control Voltage 200 V ac/dc
Maximum Control Voltage 253 V ac/dc
Switching Type AC/DC
Terminal Type Cage Clamp
Output Device Transistor/Triac
Maximum Turn On Time <lteq/>100 μs
Dimensions 94 x 6 x 81 mm
Operating Temperature Range -20 → +60 °C
Height 81 mm
Minimum Operating Temperature -20 °C
Special Features AC/DC Switching, DC Output, 2-Conductor Technology
Relay Type Solid State Relay
Depth 6 mm
Maximum Operating Temperature +60 °C
Control Voltage Range 200 → 253 V dc
Length 94 mm
Load Voltage Range 0 → 48 V dc
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
39,80
(excl. BTW)
48,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
39,80 €
Related Products
Compact DIN rail mount solid state relays designed ...
Description:
Compact DIN rail mount solid state relays designed for industrial environmentThyristor constructed and capable of withstanding 3 times over-voltage rating and 400A for 10msac or unpolarised dc input with LED indicationIP20 (IEC52) rated polycarbonate caseDesigned to relevant IEC and UL ...
Compact DIN rail mount solid state relays designed ...
Description:
Compact DIN rail mount solid state relays designed for industrial environmentThyristor constructed and capable of withstanding 3 times over-voltage rating and 400A for 10msac or unpolarised dc input with LED indicationIP20 (IEC52) rated polycarbonate caseDesigned to relevant IEC and UL ...
The pin assignment for SIM-EI miniature opto-couplers is ...
Description:
The pin assignment for SIM-EI miniature opto-couplers is compatible with G2R (Omron) and RT (Schrack) type relays with 5 mm pins.They may be used in place of electro-mechanical relays to convert signals from sensor units.
6.2mm DIN-rail mount (35 mm) SSR assemblyRatings 24Vdc ...
Description:
6.2mm DIN-rail mount (35 mm) SSR assemblyRatings 24Vdc at 3.5A, 48Vdc at 100mA and 240Vac at 2A5 and 24 Vdc and 120V and 240 Vac control voltageUL and cUL recognised at 40°C, 100K-cycle endurance testYellow LED input status indicator.