AZM 200 Solenoid Interlock Switch Power to Unlock 24 V dc

  • RS-stocknr. 880-1788
  • Fabrikantnummer AZM 200ST2-T-1P2PW
  • Fabrikant Schmersal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Schmersal AZM200 Solenoid Interlock Switch

Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.

Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
Manual release
IP67 to IEC/EN 60529

Actuators and Lockout Tag

Stock no. 880-1794 for sliding guards, left hand
Stock no. 880-1797 for sliding guards, right hand
Stock no. 880-1791 for one-hand emergency exit, left hand
Stock no. 880-1801 for one-hand emergency exit, right hand
Stock no. 880-1804 is a lockout tag

Note

Actuators must be ordered separately.

Standards

EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 60947-5-1.

Approvals

TUV, cULus.

Specificaties
Kenmerk Waarde
Series AZM 200
Power to Lock / Unlock Power to Unlock
Actuator Included No
Actuator Type Various Options
Conduit Entry M12
Length 40mm
Width 220mm
Depth 50mm
Supply Voltage 24 V dc
IP Rating IP67
Auxiliary Contacts 1 PNP
Dimensions 40 x 220 x 50 mm
Safety Contacts 2 PNP
Housing Material Plastic
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
556,66
(excl. BTW)
673,56
(incl. BTW)
Aantal stuks
Per stuk
1 +
556,66 €
Related Products
These safety interlock switches have dual restoration springs, ...
Description:
These safety interlock switches have dual restoration springs, easy to connect terminals and are available with a variety of contact arrangement and terminal type combinations. Typical applications for these safety interlock switches include office equipment and home appliances. Durability of ...
Head can be rotated allowing 4 possible actuator ...
Description:
Head can be rotated allowing 4 possible actuator entry positionsSafety contacts and auxiliary contact available with self ejecting cam mechanismSuitable for a wide range of safety interlock applicationsWater drainage feature in head allows hosing downForced guided contacts - complies with ...
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
The head is secured by tamper-resistant screws and ...
Description:
The head is secured by tamper-resistant screws and can be rotated allowing 8 possible actuator entry positions including front and end entryForced guided contacts - complies with EN 1088, IEC 947-5-1Painted die cast zinc bodyContacts break actuation travel; 6mmOperating temperature; ...