XCS-TE Solenoid Interlock Switch Power to Unlock 24 V ac/dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Telemecanique Sensors Solenoid Interlock Switch

The Telemecanique Sensors XCS-TE series solenoid interlock switch has a power supply voltage rating of 24VAC/DC. It has 1NC safety slow break and 2NC auxiliary contacts. The switch is made of plastic housing material and is a power to unlock type.
Note:
Actuators must be purchased separately, see Accessories table.

Features and Benefits

1 cable entries tapped M16 x 1.5
Key operated lock to allow authorised override of solenoid
Solenoid continuously rated 10VA, voltage limits up to -20/10% (including ripple on d. C.)
Turret heads can be rotated through 360° in 90 steps
8 actuator entries and 1 tapped entry
15N minimum operating force for positive opening

Certifications

IP67 rated
EN 1088/ISO14119
EN/IEC 60204-1
EN/IEC 60947-5-1
EN/ISO 12100
UL508
CSAC22.2 No 14

Specificaties
Kenmerk Waarde
Range Preventa
Series XCS-TE
Pole Configuration DP
Power to Lock / Unlock Power to Unlock
Actuator Included Yes
Actuator Type Key
Conduit Entry M16
Length 110mm
Width 33mm
Depth 94mm
Supply Voltage 24 V ac/dc
Maximum AC Voltage 240V
Standards Met CSA, CSA C22.2 No. 14, EN 1088, EN/IEC 60204-1, EN/IEC 60529, EN/IEC 60947-5-1, EN/ISO 12100, ISO 14119, UL, UL 508
Power Consumption 10 VA
Safety Contacts 1NC
Maximum DC Voltage 250V
Auxiliary Contacts 2NC
IP Rating IP67
Housing Material Plastic
Dimensions 110 x 33 x 94 mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
276,00
(excl. BTW)
333,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
276,00 €
Related Products
The MA200 insulated current probes are equipped with ...
Description:
The MA200 insulated current probes are equipped with a BNC output and can be connected to all types of oscilloscopes. They offer high bandwidth and are particularly suitable for viewing transient signals. The MA200 models can notably be used to ...
Universal DC Input4 Voltage (300 VDC Max) and ...
Description:
Universal DC Input4 Voltage (300 VDC Max) and 5 Current (2A DC Max) Ranges3 Resistance Ranges - 10K ohm max1/8 DIN (50 mm x 97 mm)5 Digit, 0.56" (14 mm) LEDRed, Sunlight Readable DisplayField Upgradeable Option Cards85 to 250 VAC ...
The Schneider Harmony XVPC series is a visual ...
Description:
The Schneider Harmony XVPC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.These signal towers ...
Fully compliant to the PICMG® 2.11 power interface ...
Description:
Fully compliant to the PICMG® 2.11 power interface specification using a standard Positronic 47-Pin connectorAt 50°C delivers 40A on both the +5 and +3.3 volt outputsRemote sense and active current share on the +5, +3.3 and +12 volt outputs, along ...