Metcal PS-900 Soldering Station, 240V

  • RS-stocknr. 456-018
  • Fabrikantnummer PS-900
  • Fabrikant Metcal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

PS900 Soldering Station

The PS Series uses Metcal SmartHeat® technology to deliver the power required for lead-free connections. Smartheat's variable power technology instantaneously senses and continuously delivers the precise thermal energy to the pad, yielding high quality solder joints while protecting sensitive components from damage.

What are the benefits of PS-900?

• SmartHeat® temperature control
• Ergonomic and lightweight handle
• Rugged cast aluminium housing
• Low cost, quick- change heater coil
• Added plating thickness to tips

What features does PS-900 offers?

Power Supply:

• Ambient Operating Temperature 10 - 40°C
• Maximum Enclosure Temperature 65°C
• Input Line Voltage 100 - 240 VAC
• Power Consumption 90 Watts max
• Output Frequency 450 KHz
• Dimensions W x D x H 80 x 160 x 115 mm (3.1" x 6.3" x 4.5")

Soldering Handle and Coil Assembly:

• Tip-to-Ground Potential: < 2 mV
• Tip-to-Ground Resistance: < 2 ohms
• Idle Temperature Repeatability: ± 1.1°C in still air
• Handle Cord Assembly Length: 122 cm – burn proof, ESD safe
• 3-pin power connector
• Overall length (with tip): 230 mm (9.06") with standard tips
• Grip diameter: 13 mm (0.51")
• Tip to grip: 58 mm (2.28")
• Tip shaft diameter: 8.0 mm (0.31")
• Tip length: 82 mm (3.23") to 93 mm (3.66") (typical)
• Workstand W x D x H: 105 x 175 x 90 mm (4.1" x 6.9" x 3.5")

PS-900 Soldering Station is supplied with:

• 1x PS-PW900 Power Supply
• 1x PS-HC3 Hand-piece with long cord with Coil Assembly
• 1x SFV-CH15A Chisel soldering tip 1.5mm (.06")
• 1x WS2-NS Workstand
• 1x AC-CP2: Tip removal pad

Applications:

Maintenance and Repair

Note

Please be aware solder wire is not included with this Soldering Station. Why not try RS brand Solder wire? 756-8884

Soldering - OKI/ Metcal

Specificaties
Kenmerk Waarde
Model Number PS-900
Tasks Supported Soldering
Plug Type Type F - Schuko plug, Type G - British 3-pin
Wattage 90W
Input Voltage 240V
Soldering Tip Temperature 471°C
Number of Outputs 1
Display Type LCD
ESD Safe Yes
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Set
253,18
(excl. BTW)
306,35
(incl. BTW)
Set(s)
1 +
253,18 €
Related Products
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...
SmartHeat Power on Demand TechnologyPatented Connection Validation IMC ...
Description:
SmartHeat Power on Demand TechnologyPatented Connection Validation IMC Formation Technology2.8” colour touchscreen with bold graphicsCommunications Port for process traceability data and firmware graphicsPrecise tip temperature displayIntegrated Net Power Meter and power graphPatented Chip-in-Cartridge ...
Introducing the WAD 101 Multi-Function Hot Air Station ...
Description:
Introducing the WAD 101 Multi-Function Hot Air Station from Weller featuring the professional digital process control for accurate temperature parameters. Compatibility with a wide range of tools, including soldering, desoldering irons makes this station ideal in many professional applications. The ...
The Ersa RDS 80 digital soldering station offers ...
Description:
The Ersa RDS 80 digital soldering station offers the Ersa RESISTRONIC temperature control with generous 80 watts of power.With ceramic PTC (positive temperature coefficient) heating element, the temperature sensor is ensuring the control of the heat that runs through. This ...