RS PRO Blue Crimp Splice

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Heat Shrink Butt Connectors

Three colour coded watertight crimp splices/heat shrink butt connectors covered with dual wall heat shrinkable tubing and hot melt inner liner. They offer excellent strain relief, visual inspection, solvent and moisture resistance with good physical and electrical properties.

Splices

Specificaties
Kenmerk Waarde
Sleeve Length 35mm
Material Copper
Voltage Rating 600 V
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Shrink Temperature +150°C
Colour Blue
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/08/2020, met een levertijd van 1 werkdag.
Prijs Each (In a Bag of 10)
0,955
(excl. BTW)
1,156
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
10 - 140
0,955 €
9,55 €
150 - 490
0,909 €
9,09 €
500 +
0,86 €
8,60 €
*prijsindicatie
Related Products
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
These terminals allow connection of wires to component ...
Description:
These terminals allow connection of wires to component pins, posts, tabs or terminals.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use ...
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a ...
These sealed sleeves enable several wires to be ...
Description:
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.Recommended for locations that would be difficult to access later.They feature a heat-fusion adhesive insert to ensure the splice is sealed.Easy ...