TE Connectivity Transparent Solder Sleeve 1.6 → 3.2mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Wire Termination: Pin, Post & Tab

Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 1.6mm
Maximum Cable Diameter 3.2mm
Sleeve Length 16mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 500
375,26
(excl. BTW)
454,06
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 14
375,26 €
0,751 €
15 - 49
356,54 €
0,713 €
50 +
337,73 €
0,675 €
*prijsindicatie
Related Products
RW-175 heat shrinkable tubingTough semirigid thin wall insulationTranslucent ...
Description:
RW-175 heat shrinkable tubingTough semirigid thin wall insulationTranslucent polyvinylidene fluoride materialRW-175 provide electrical insulation and strain relief of multipin connectors and solder jointsUsed as insulation for high temperature components and heater leadsProvides protection from most industrial ...
These terminals allow connection of wires to component ...
Description:
These terminals allow connection of wires to component pins, posts, tabs or terminals.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use ...
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a ...
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a ...