TE Connectivity Transparent Solder Sleeve 0.6 → 1.95mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Solder Sleeves and Kit

The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm.

Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connections
Temperature range -55°C to +125°C
Terminate bare or tin plated conductors
Supplied in a storage case with locking lid
Refills available - see Solder Sleeves, as well as other High-Spec Solder Sleeves and Wire to wire Splices.

//media.rs-online.com/t_line/L157295-01.gif
//media.rs-online.com/t_line/L157296-01.gif
//media.rs-online.com/t_line/LD157297-01.gif
Specificaties
Kenmerk Waarde
Minimum Cable Diameter 0.6mm
Maximum Cable Diameter 1.95mm
Sleeve Length 26mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Quantity 1
Colour Transparent
36 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
89 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Box of 100
50,14
(excl. BTW)
60,67
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 14
50,14 €
0,501 €
15 - 49
47,62 €
0,476 €
50 +
45,12 €
0,451 €
*prijsindicatie
Related Products
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
These sealed sleeves enable several wires to be ...
Description:
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.Recommended for locations that would be difficult to access later.They feature a heat-fusion adhesive insert to ensure the splice is sealed.Easy ...
Each terminator consists of heatshrinkable sleeve containing prefluxed ...
Description:
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated ...
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and ...
Description:
Transparent Insulation SleeveProvides Encapsulation, Inspectability, Strain Relief and InsulationHeat shrinkable, radiation cross linked modified polyolefinThermally stabilized thermoplasticApplications: Designed to splice tin plated or bare copper stranded wires.