TE Connectivity Transparent Solder Sleeve 0.4 → 1.7mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Solder Sleeves and Kit

The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm.

Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connections
Temperature range -55°C to +125°C
Terminate bare or tin plated conductors
Supplied in a storage case with locking lid
Refills available - see Solder Sleeves, as well as other High-Spec Solder Sleeves and Wire to wire Splices.

//media.rs-online.com/t_line/L157295-01.gif
//media.rs-online.com/t_line/L157296-01.gif
//media.rs-online.com/t_line/LD157297-01.gif
Specificaties
Kenmerk Waarde
Minimum Cable Diameter 0.4mm
Maximum Cable Diameter 1.7mm
Sleeve Length 26mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Quantity 1
Colour Transparent
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/08/2020, met een levertijd van 1 werkdag.
Prijs 1 Box of 100
45,90
(excl. BTW)
55,54
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 14
45,90 €
0,459 €
15 - 49
43,60 €
0,436 €
50 +
41,30 €
0,413 €
*prijsindicatie
Related Products
A range of discrete PCB through hole press-fit ...
Description:
A range of discrete PCB through hole press-fit miniature spring sockets for discrete wire. These discrete sockets are available with a closed bottom or open bottom sleeve style and a variety of lengths and plating options. Please see additional data ...
A 25 piece assorted kit of heat-shrinkable sleeves ...
Description:
A 25 piece assorted kit of heat-shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A ...
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a ...