TE Connectivity Transparent Solder Sleeve 8.4 → 13mm

Datasheets
Wetgeving en conformiteit
Niet conform
Productomschrijving

CWT 38 braided cable terminals

These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 8.4mm
Maximum Cable Diameter 13mm
Sleeve Length 42mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/02/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 100)
3,575
(excl. BTW)
4,326
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 100
3,575 €
357,50 €
200 - 300
3,397 €
339,70 €
400 +
3,146 €
314,60 €
*prijsindicatie
Related Products
These sealed sleeves enable several wires to be ...
Description:
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.Recommended for locations that would be difficult to access later.They feature a heat-fusion adhesive insert to ensure the splice is sealed.Easy ...
D-142 compact terminals allow earth tags to be ...
Description:
D-142 compact terminals allow earth tags to be created on screened cables and are compatible with many dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress. • Easy-to-use, simply ...
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connectionsTemperature range -55°C to +125°CTerminate bare or tin ...
A one piece soldering system for jointing signal ...
Description:
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed ...