Multicore 25g Syringe Solder Paste

  • RS-stocknr. 184-9985
  • Fabrikantnummer 291264
  • Fabrikant Multicore
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: GB
Productomschrijving

Fine Pitch Stencilling Grade

Two types of long open time SMT paste for stencilling or dispensing (with syringe). They print below 0.5mm (20 thou) pitch and meet IPC-SF-818 and Bellcore TR-NWT-0000 78 without cleaning. Approx melting point 179°C. Particle size 38-53μm.

RM89 (25g/75g Syringe)

For automatic or manual stencil printing
62/36/2% Tin/lead/silver as 90% of total mass content

Note

Store in a cool place e.g. Refrigerator.

Standards

IPC-SF-818; Bellcore TR-NWT-0000 78

Solder Paste - Leaded

Specificaties
Kenmerk Waarde
Package Type Syringe
Package Size 25g
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 21,34 €
17,03
(excl. BTW)
20,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
17,03 €
10 - 19
16,34 €
20 - 49
15,84 €
50 +
14,48 €
Related Products
Solder Paste in jar 250g (T3) SAC305 no ...
Description:
Solder Paste in jar 250g (T3) SAC305 no clean 88.5% metal. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesPrint gradeCompatible with enclosed print headsPasses BONO test @1.56%RoHS II and REACH compliant. ...
Solder Paste Lead-Free Sn42/Bi57.6/Ag0.4 no clean Low Temperature ...
Description:
Solder Paste Lead-Free Sn42/Bi57.6/Ag0.4 no clean Low Temperature Melts 138C 281F eutectic. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesDispense gradeCompatible with enclosed print headsRoHS II and REACH compliant.
Solder Paste in jar 50g (T3) Sn42/Bi57.6/Ag0.4 Low ...
Description:
Solder Paste in jar 50g (T3) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesPrint gradeCompatible with enclosed print headsRoHS II and REACH ...
Touch Board, Pi Cap, electrical components, prototyping materials, ...
Description:
Touch Board, Pi Cap, electrical components, prototyping materials, PCBs, micro controllers, Arduino, Raspberry Pi, MaKey MaKey and e‐textiles. Use with the Touch Board or Pi Cap to make touch sensors. Conducts electricity when dryPaint, stencil or screen printAir­‐dryingNontoxic and solvent ...