RS PRO 200ml Solder Flux Aerosol Can

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Re-Work Flux Spray

From the trusted RS PRO brand, this quick-drying, mildly activated soldering flux in a 200 ml aerosol for use when removing and replacing surface mount components. The application of spray flux to solder joints will aid reflow when heating to remove components.

The no-clean flux is supplied in a spray can format that makes replacing surface mount components easy and convenient. The spray has a wide-angle actuator nozzle to give a protective film coating but can also be fitted with an extension tube actuator for selective pinpoint application. This handy applicator is ideal for precision and control.

Features and Benefits

• Mildly activated, to avoid corrosion
• 0.38% Halide Content
• 200ml aerosol
• Dries in 5 to 10 min at 20° C

Applications

An application of spray flux to solder joints will aid reflow when heating to remove surface mount components from a printed circuit board (PCB.) The flux should be applied to solder pads for the placement of new components, with hot air or hot gas, or using conventional solder and iron.

Spray flux can also be used as an anti-tarnish, protective film on bare copper or tinned tracks providing excellent solderability for up to six months. This solder flux is particularly recommended for electronics applications for precision products e.g. telecommunications or professional computers where a high degree of reliability is required.

Why RS PRO?

RS PRO aims to be your go-to brand for reliability and value for money. We source great parts at great prices and test everything with our in-house experts to ensure the quality you need.

When it comes to tools, we know that versatility and dependability are what you need. As such, we stock a variety of mainstay and specialist tools to suit any application. Whether you're a professional electrician, plumber, builder or DIY enthusiast, RS PRO is here to support you.

Warning

  • Flammable product.
Specificaties
Kenmerk Waarde
Package Type Aerosol Can
Package Size 200ml
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
13,01
(excl. BTW)
15,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
13,01 €
6 - 14
12,49 €
15 +
12,22 €
Related Products
Tack Flux no clean in a 10cc syringe ...
Description:
Tack Flux no clean in a 10cc syringe w/plunger & tip. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, ...
Tack Flux no clean 5cc (for lead-free applications) ...
Description:
Tack Flux no clean 5cc (for lead-free applications) w/plunger & tip. Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applicationsNon-corrosive, non-conductive, no-cleanTack flux will not run all over PCB when ...
Tack Flux in 8cc Squeeze Tube (same flux ...
Description:
Tack Flux in 8cc Squeeze Tube (same flux as SMD291). Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applicationsNon-corrosive, non-conductive, no-cleanTack flux will not run all over PCB when appliedHas ...
Tack Flux no-clean water-washable 10cc syringe w/plunger & ...
Description:
Tack Flux no-clean water-washable 10cc syringe w/plunger & tip. Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflowapplicationsNon-corrosive, non-conductive, no-clean, water-washableTack flux will not run all over PCB when appliedHas ...