Energy Generation Kit Flex Rise Two 100W

  • RS-stocknr. 888-3692
  • Fabrikantnummer 600262
  • Fabrikant Phaesun
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Phaesun Energy Generation Kit

These solar panel kits include all components for reliable energy supply either for mobile use or for fixed installations etc. They are ideal for battery charging for camping, caravanning or on boats and for the charging of USB applications.

Fully weather resistant solar modules with a long durability, salt water protected
High efficient back contact cells
USB appliance charging
Solar cable with standard 4 connectors
Ideal for deck tops, caravan roofs and camper vans
2 year panel warranty and 20 year cell performance warranty

Supplied with

1x Semi-flexible solar module 100W
1x Charge controller 10A with USB outlet
1x Quick Cab 4-2, 5/5
1x Battery cable with 15A fuse
1x Roof Duct Water tight two white
1x Glue Cartridge
1x Cleaner

Supplied with

1x Semi-flexible solar module 100W
1x Charge controller 10A with USB outlet
1x QuickCab 4-2, 5/5
1x Battery cable with 15A fuse
1x Roof Duct Water tight two white
1x Glue Cartridge
1x Cleaner

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.

Grid Connect Kits:

Solar Energy Kits to supply grid connected electricity, offsetting electricity used are available through Product Plus. These roof mount type systems start at less than 8 square metres for 1kW.

Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Optional cable crimp kit is a high performance ...
Description:
Optional cable crimp kit is a high performance kit which offers a full crimped termination to the cable braid for greater screening integrity and improved cable strain relief which accepts max. cable diameters between 6 and 9.5mm. Crimps are supported ...
The Evaluation Kit, P/N AFIK-1002 allows users to ...
Description:
The Evaluation Kit, P/N AFIK-1002 allows users to test how energy harvesting technology works and to measure specific parameters, such as signal strength and range, in their own applications. Typical uses include industrial and building automation, smart home or medical ...
The Fluke Networks Fiber QuickMap is an enterprise ...
Description:
The Fluke Networks Fiber QuickMap is an enterprise fiber troubleshooter that quickly and efficiently locates connections and breaks in multimode fiber. VFLs work well for exposed lengths of fibre near a patch panel by illuminating bad connections and breaks. They ...
Tgard™ 500 is a medium thermal performance insulator ...
Description:
Tgard™ 500 is a medium thermal performance insulator pad consisting of a ceramic filled high temperature silicone rubber coated on electrical grade fibreglass. Tgard™ 500 is designed for applications that require additional thickness to prevent electrical shorts from stamped aluminum ...