- RS-stocknr.:
- 202-3127
- Fabrikantnummer:
- YSRW-12-20
- Fabrikant:
- Festo
1 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 139,26
(excl. BTW)
€ 168,50
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 139,26 |
- RS-stocknr.:
- 202-3127
- Fabrikantnummer:
- YSRW-12-20
- Fabrikant:
- Festo
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
Festo Shock Absorber - YSRW Series - YSRW-12-20
This pneumatic shock absorber from Festo is suitable for use in a hydraulic cylinder. It cushions the impact of a moving piston and prevents damage and unnecessary wear to moving parts. The unit is self-adjusting and automatically reacts to the force applied to it. It has a built-in pressure spring to mechanically move the piston rod back to its original position. The component's seals are made from nitrile rubber (NBR), which offers resistance to heat and corrosion.
Stroke length of 20 mm
Maximum impact speed of 3 m/s
Reset time range of 0.3 s to 1 s
Pushing action mode of operation
Cushioning length of 20 mm
Maximum stop force of 1000 N
Reset force of 5 N
Housing material of galvanised steel
Piston rod material of high alloy steel
Operating temperature range of -10°C to +80°C
Locknut mounting
Weight of 78 g
Maximum impact speed of 3 m/s
Reset time range of 0.3 s to 1 s
Pushing action mode of operation
Cushioning length of 20 mm
Maximum stop force of 1000 N
Reset force of 5 N
Housing material of galvanised steel
Piston rod material of high alloy steel
Operating temperature range of -10°C to +80°C
Locknut mounting
Weight of 78 g
Range Information
The YSRW series of pneumatic shock absorbers is designed to improve production quality by moderating the damaging side effects of motion, noise and vibration
The range features galvanised steel housings that are resistant to corrosion and stand up to the demands of high-temperature applications
The range features galvanised steel housings that are resistant to corrosion and stand up to the demands of high-temperature applications
The Festo push-in sleeve has push/pull principle of structure which used PBT type of housing material. Its nominal size is 3.8mm and can be assembled in any position.
Container size 50
Ambient temperature -10 to 80 °C
Ambient temperature -10 to 80 °C
Specificaties
Kenmerk | Waarde |
---|---|
Thread Size | M16 |
Body Length | 72.5mm |
Overall Length | 105mm |
Shock Absorber Type | Shock Absorber |
Manufacturer Series | YSRW |
Maximum Energy Capacity Per Hour | 41000Nm |
Maximum Energy Capacity Per Cycle | 12Nm |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +80°C |
- RS-stocknr.:
- 202-3127
- Fabrikantnummer:
- YSRW-12-20
- Fabrikant:
- Festo