DFRobot, Romeo BLE mini DC Controller Board

  • RS-stocknr. 124-4688
  • Fabrikantnummer DFR0351
  • Fabrikant DFRobot
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Romeo BLE Mini Arduino Motor Drive Board

Romeo BLE mini is small Arduino Robot Control Board with motor driver and CC2540 Bluetooth 4.0 (BLE) chip. The board benefits from the Arduino open source platform and includes open source codes. With the integrated 2 way DC motor driver, projects can be started without any additional motor driver shield.

Features:
On-board BLE chip: TI CC2540
Transmission range: <30 m
Easy to use BLE firmware updating
Wireless Programming Via BLE
Support Bluetooth HID
Support AT command to config the BLE
Support the master-salve machine switch
Transparent communication through Serial
Microcontroller: Atmega328p
Bootloader: Arduino UNO
8 Digital I/O ports
2 PWM Outputs(Pin11,Pin10)
4 10-bit analogue input ports
USB port
Auto sensing/switching external power input
TTL I2C ICSP interfaces
2 way H-bridged Motor Driver with 1.5A maximum current (each one)
Size: 45 x 38.5 mm(1.77 x 1.52")

Romeo family

Specificaties
Kenmerk Waarde
Product Name Romeo BLE mini DC Controller Board
Kit Classification Controller Board
Processor Part Number DFR0351
For Use With Robotic Applications
102 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,13
(excl. BTW)
27,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,13 €
Related Products
The Brushless click is an add-on board that ...
Description:
The Brushless click is an add-on board that drives 3-phase full-wave Brushless DC motors. A PWM Sensorless Controller IC (Toshiba TB6575FNG), controls the rotation speed. External motor power supply 7 to 32 V dc capable of 2 APulse Width Modulation ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 ...
The STEVAL-FCU001V1 is designed to support quadcopter drone ...
Description:
The STEVAL-FCU001V1 is designed to support quadcopter drone designers. A complete sample FW project allows the designer to begin flying small and medium size quadcopters (with brushed or brushless DC motors) immediately and evaluate the performance of the IMU sensors ...