Proto shield extension Arduino MEGA Rev3

  • RS-stocknr. 769-7399
  • Fabrikantnummer A000080
  • Fabrikant Arduino
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Arduino Proto Shields (assembled, unassembled and Mega)

Arduino have three proto shields: assembled (7589345), unassembled (6961673) and (7697399) specifically for the Arduino Mega. All of the shields are ideal for your customized Arduino designs.

Features & Benefits of the Proto Shield
•Connections for all Arduino I/O pins
•Space for through-hole and surface mount ICs
•Components can be soldered to the shield (a solderless breadboard is needed for non-soldered prototyping)

Arduino Proto shield extension MEGA Rev3

The Arduino prototyping shield makes it easy for you to design custom circuits for the MEGA standard Arduino pinout. It has three proto shields which are assembled, unassembled and Arduino mega. This board is used to create a project by soldering the parts to the prototyping area or a small solderless breadboard is used to test the circuit. The Mega Proto Shield Rev3 (PCB) comes with extra connections for all the Arduino I/O pins and provides space to mount through-hole and surface mounts integrated circuits. The Arduino. org shields are boards that can be plugged on top of the Arduino PCB, extending its capabilities. The different shields follow the same philosophy as the original toolkit. These Arduino Shields are easy to mount.

Features and Benefits


Connections for all Arduino I/O pins
• Space for through-hole and surface mount ICS
• Components can be soldered to the shield
• 1 Reset button
• 1 ICSP connector
• Proto Area with multiple THT pads, 100 mils pitch

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Arduino Shields & Add-On Boards

Our range of shields and add-on boards can add the extra functionality you need by attaching on top of or plugging into an Arduino board. Functionality ranges from adding motion sensing, power management, motors and displays to connecting your devices via Ethernet, GSM, WiFi and USB. There are also options for more flexible prototyping.

51 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
533 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,15
(excl. BTW)
5,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
4,15 €
5 - 9
4,03 €
10 +
3,93 €
Related Products
From Hitex, the ShieldBuddy TC275 is a development ...
Description:
From Hitex, the ShieldBuddy TC275 is a development board that features an AURIX Infineon TC275 tri-core processor. Aurix processors have been specifically developed for safety-critical ADAS automotive applications. The ShieldBuddy is suited to professionals, students or hobbyists alike. This development ...
The DS9490 series is a uniquely designed USB ...
Description:
The DS9490 series is a uniquely designed USB bridge and holder for a single F5-size iButton, with a high-speed 12 Mbps USB Interface, which supports standard and overdrive 1-wire communications. Slew-Rate-Controlled 1-wire timing and active pullup for improved 1-wire network ...
The Pycom antenna is suitable for use in ...
Description:
The Pycom antenna is suitable for use in the 868MHz/915MHz LoRa bands. This external antenna is required for the LoPy and SiPy development boards and using without an antenna can damage the device.The kit includes:- RF Cable Assemblies RP-SMA (Female) ...
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...