RS PRO Metric O-Ring Splicing Kit Nitrile, Kit Contents 18 Pieces

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Nitrile O-Ring Splicing Kit

Nitrile NBR70 splicing kit for fast, on the spot production of O-Rings, reducing down time. Replacement Nitrile O-Ring cord is available separately, from 1.6 mm to 8.4 mm diameter.

Features and Benefits

• A selection of O-Ring sizes
• Cost effective
• Suitable for many applications

Application Information

Nitrile (NBR) is suitable for use within applications running at a maximum continuous temperature of 120°C (or up to 150°C intermittently). Use below -30°C requires special consideration.

Note

O-Ring cord within the kit is supplied in 2m lengths

Contents

Cord in sizes of: 1.78, 2.0, 2.4, 2.62, 3.0, 3.5, 4.0, 5.0, 5.33, 5.7, 6.0, 7.0 and 8.0mm
1 x 3g bottle of cyanoacrylate adhesive
1 x Splicing jig
1 x Safety knife
1 x Tape measure
Instruction leaflet

Contents

Refer to table

Specificaties
Kenmerk Waarde
Type Metric O-Ring Splicing Kit
Material Nitrile
Kit Contents 18 Pieces
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
148 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
67,26
(excl. BTW)
81,38
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
67,26 €
5 - 9
65,19 €
10 +
63,09 €
Related Products
From Lapp, this Skintop series of cable glands ...
Description:
From Lapp, this Skintop series of cable glands have and incredibly robust construction, and are suitable for ATEX applications. The Skintop MS-M-EX-RRxe II Cable Gland has a brass nickel plated body, and a high degree of environmental resistance. With a ...
O-ring kit with everything you need to make ...
Description:
O-ring kit with everything you need to make static nitrile rubber O-ringsUse the cutting template and blade to cut them to length square to the old O-ring and clean upApply a drop of adhesive to one side then press the ...
The centring feature of the seals in this ...
Description:
The centring feature of the seals in this kit is a thin membrane, the ID of which equals the core diameter of the locating thread. They offer low assembly resistance to ensure a central location of the seal. Material: Nitrile ...
Seals designed to fit the SAE J518 location ...
Description:
Seals designed to fit the SAE J518 location grooves. With their rectangular cross-section and point-contact seal lips, they are formed and sized to accurately locate within the machine housing. Manufactured from a high performance grade of polyurethane, specifically developed for ...