Hirose, DX Male 68 Pin Straight Cable Mount SCSI Connector 1.27mm Pitch, Jack Screw, Screw

  • RS-stocknr. 162-5724
  • Fabrikantnummer DX-68-CV1
  • Fabrikant Hirose
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Hirose original 1.27mm pitch High-Density I/O connectors

1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 68
Body Orientation Straight
Mounting Type Cable Mount
Contact Material Copper Alloy
Contact Plating Gold
Housing Material PBT
Pitch 1.27mm
Current Rating 500mA
Voltage Rating 125 V ac
Latch Type Screw
Termination Method Jack Screw
Series DX
Length 64.68mm
Minimum Operating Temperature -55°C
Width 32mm
Maximum Operating Temperature +85°C
Depth 11.5mm
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,98
(excl. BTW)
16,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
13,98 €
5 - 9
13,28 €
10 +
12,71 €
Related Products
Large angled nose J.S. Popper telecom clip with ...
Description:
Large angled nose J.S. Popper telecom clip with bed of nails and single spike. This telecom clip has corrosion resistant nickel silver jaws which open to a maximum of 25.4mm and is equipped with a single spike and a bed ...
AMPLIMITE series .050 series II vertical mount PCB ...
Description:
AMPLIMITE series .050 series II vertical mount PCB d-sub header with a 1.27mm centreline that offers excellent EMI/RFI protection. This AMPLIMITE series .050 series II d-sub PCB header has a nickel over copper plated zinc die cast full metal shell, ...
These 3M Mini D Ribbon (MDR) 102 Series ...
Description:
These 3M Mini D Ribbon (MDR) 102 Series PCB shielded receptacles have M2.5 or M2.6 lockdown threads. The design of these MDR 102 Series PCB shielded receptacles incorporates a latching interface for connector stability. Mates with 101XX-6000 Series Plugs see ...
These 3M Mini D Ribbon (MDR) IDC Wiremount ...
Description:
These 3M Mini D Ribbon (MDR) IDC Wiremount Panelmount Receptacle Shielded connectors can be used with Flat, Shielded Flat or Twisted Pair cables. The interface latch design of these IDC Wiremount Panelmount Receptacles provides a stable connection to its mating ...