- RS-stocknr.:
- 162-5719
- Fabrikantnummer:
- DX-20-CV1
- Fabrikant:
- Hirose
Op voorraad - levertijd 3 à 5 werkdagen.
Toegevoegd
Prijs Per stuk
€ 15,20
(excl. BTW)
€ 18,39
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 15,20 |
10 - 24 | € 14,44 |
25 - 49 | € 12,93 |
50 + | € 12,18 |
- RS-stocknr.:
- 162-5719
- Fabrikantnummer:
- DX-20-CV1
- Fabrikant:
- Hirose
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- JP
Productomschrijving
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
This product is a cover case for high-density I/O connectors.
Specificaties
Kenmerk | Waarde |
---|---|
Number of Contacts | 20 |
Body Orientation | Straight |
Mounting Type | Cable Mount |
Housing Material | PBT |
Pitch | 1.27mm |
Latch Type | Screw |
Termination Method | Jack Screw |
Series | DX |
Length | 34.2mm |
Width | 32mm |
Minimum Operating Temperature | -55°C |
Depth | 11.5mm |
Maximum Operating Temperature | +85°C |