Phoenix Contact SUBCON-PLUS Series 9 Way Straight Female Screw Terminal D-sub Connector

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

SUBCON-PLUS-CAN – 2744694

A straight D-SUB connector from Phoenix Contact. The 9 way connector is part of the SUBCON-PLUS series and has a termination resistor that can be connected/ switched on through the slide switch. This female, D-SUB connection is suitable for wire size 18 – 26 AWG.

Features and Benefits

• Female, screw terminal
• Metal plated ABS housing
• Cable mounting type
• Operating temperature of -20°C to +75°C

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Female
Number of Contacts 9
Body Orientation Straight
Housing Material Metal Plated ABS
Current Rating 100mA
Voltage Rating 50 V
Dimensions 60 x 44 x 16mm
Mounting Type Cable Mount
Series SUBCON-PLUS-CAN
Depth 16mm
Length 60mm
Width 44mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
75 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
38,85
(excl. BTW)
47,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
38,85 €
25 - 74
35,70 €
75 - 199
34,63 €
200 - 399
32,90 €
400 +
31,25 €
Related Products
Multi-Contact sockets with threaded bolts that are suitable ...
Description:
Multi-Contact sockets with threaded bolts that are suitable either to screw into cable terminal lugs, bus-bars, contact blocks or to incorporate into insulated housings for slide-in-rack technology.,Available as 3mm, 5mm, 6mm and 8mm sockets. Current Rating (A) : 3mm (40), ...
Vertical Card Edge connectors for PCI Express technology ...
Description:
Vertical Card Edge connectors for PCI Express technology on a 1.00mm pitch. Offer 1,4,8 or 16 serial PCI Express links to scale different bandwith requirementsEach serial link supports 2.5Gbps (per direction)Retention locks available (see 615-9546).
A range or RS Pro metal Firewire IEEE ...
Description:
A range or RS Pro metal Firewire IEEE 1394 feedthrough connectors. The Firewire connectors are housed in robust nickel plated zinc XLR shells with universal 23.6 mm diameter cut outs. The metal feedthrough connectors are suitable for front or rear ...
From Amphenol, this solenoid operated smart card connector ...
Description:
From Amphenol, this solenoid operated smart card connector features a PUSHMATIC® system that allows manual insertion of a card followed by automatic ejection after a transaction is completed. • These connectors feature an automatic ejection facility after the read/write operation ...