Phoenix Contact SUBCON-PLUS Series 2.77mm Pitch 9 Way Right Angle Male Screw Terminal D-sub Connector

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors

Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)

For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351

SUBCON-PLUS-PROFIB/SC2

A right angled, D-SUB connector from Phoenix Contact. The 9-contact connector is part of the SUB-CON PLUS series and has a termination resistor that can be connected/switched on through the slide switch.
Designed for using in the PROFIBUS and CAN systems the shielded connector ensures a maximum transmission rate.

Features and Benefits

• 35° angled cable entry and an internal connection unit which can be turned around enabling cable insertion from the left or the right and a screw connection
• 9 Copper alloy contacts
• Pitch of 2.77mm
• Metal plated ABS housing
• Operating temperature of -20°C to +75°C
• Shock and vibration resistance according to EN 50155

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 9
Body Orientation Right Angle
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material Metal Plated ABS
Current Rating 1A
Voltage Rating 60 V
Mounting Type Cable Mount
Series SUBCON-PLUS
Depth 16.6mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Length 58mm
Width 39.4mm
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
139 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
37,45
(excl. BTW)
45,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
37,45 €
10 - 24
37,44 €
25 - 49
37,42 €
50 - 99
37,41 €
100 +
37,40 €
Related Products
From Harting, a range of solder D-Sub miniature ...
Description:
From Harting, a range of solder D-Sub miniature connectors with stamped and angled female contacts. The U.S footprint sockets have copper alloy contacts in a robust metal shell with extra grounding pin. Secured in the panel with a fixing flange ...
WR-DSUB series PCB, through hole right angle mount ...
Description:
WR-DSUB series PCB, through hole right angle mount D-sub pin header and socket connectors with UNC 4-40 hex screw locks. These d-sub PCB mount header and socket connectors have a black UL94-V0 PBT insulator with a steel tin plated shell ...
A range of D-Sub MHDD Series and MHDD-M ...
Description:
A range of D-Sub MHDD Series and MHDD-M Series Right Angle PCB Mount Plug and Socket connectors with stamped steel Tin plated shells with Ø3 mm holes.The Insulator material for these MHDD Series and MHDD-M Series Right Angle PCB Mount ...
Male and female D-Sub connectors with direct screw ...
Description:
Male and female D-Sub connectors with direct screw connectionsThese D-Sub's are all 2 Row Connectors.Easy wiring without the need for any special tool (a standard electrician's screwdriver can be used), ideal for field applicationsApplications: industry (control and automated systems), buildings ...