Eaton Safety Relay Dual Channel With 2 Safety Contacts Compatible With Emergency Stop, Safety Switch/Interlock

  • RS-stocknr. 812-8957
  • Fabrikantnummer ESR5-NO-21-24VAC-DC
  • Fabrikant Eaton
Wetgeving en conformiteit
Land van herkomst: DE

ESR5 Safety Relays

The ESR5 safety relay from Eaton is designed to monitor the signals from safety devices at all times and switch off quickly and reliably in an emergency. Suitable for applications that meet the highest safety requirements in accordance with EN 954-1, EN ISO 13849-1 up to PL e and accordance with IEC 62061 up to SILCL 3.


UL, cULus, TÜV.

All in one – Safety and control relay combined in a single device

The Eaton ESR5 safety relay, with built in dual channel (2 Safety contacts) offers you versatile analysis of potential hazards in your machine moving environment. The ESR5 will monitor your safety devices such as emergency stops buttons, safety guards, light curtains or two handed controls. In the event there is a failure or hazard detected, the ESR5 will work quickly to switch off the power to the machine.

What are some of the features?

The particular model offers you one or two channel variants so you can implement your safety appliances. Internal logic of the safety relay will monitor your entire safety circuit and all connect peripherals such as (emergency stop buttons, safety doors or light curtains) and will run the path for you when in a fault-free state. In the event of a fault, the safety relay will quickly engage its primary function in cutting off power to the affected area/s. A secure logic unit in the device is used to monitor the position of movable safety devices and is detected through the use of position switches or non-contact sensors giving you the added benefit of providing risk assessments with the aim to reduce the degree of risk. Machinery that must have both of the operators hands located outside the hazardous area is assessed by the ESR5 by monitoring the timing sequence, which can be used in these two handed control situations, which in turn conforms to safety requirements of category IIIC to EN 574.

Advantages of the ESR5

Narrow in width allowing you to house more important safety devices to your area where space may be an issue. Many safety switching contacts and up to 5 enable and 2 signal current paths Approved to TÜV Rheinland, UL/CUL, CSA Wide range of features offered with the device, allowing you to stay flexible and able to respond immediately to current or future changes in application requirements. This will save you cost & time in the long term.

Technical safety parameters

Up to Performance Level PL e to EN ISO 13849-1 Up to Safety Integrity Level SIL CL 3 to IEC 62061

Kenmerk Waarde
Number of Channels 2
Function Emergency Stop, Safety Switch/Interlock
Safety Contacts 2
Reset Method Automatic, Manual
Terminal Type Screw
Length 22.5mm
Width 114.5mm
Depth 99mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
191,27 €
Related Products
The emergency stop will not permit false signals ...
The emergency stop will not permit false signals if the Self Monitoring contact block is incorrectly installed. Can be used as part of emergency stop safety relay circuitIP2X protection rating40mm diameter operatorsTrigger actionIntegral arrows to clearly indicate clockwise release directionCompliant ...
The Bulletin 100S-C safety contactors provide mechanically linked ...
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
The safety relay ReLy OSSD2 is an evaluation ...
The safety relay ReLy OSSD2 is an evaluation unit for sensors or safety devices with OSSD outputs.The safety relay must only be used within the limits of the prescribed and specified technical data and operating conditions at all times.
Our Guardmaster® Safety t-ports/splitters, distribution boxes, shorting plugs, ...
Our Guardmaster® Safety t-ports/splitters, distribution boxes, shorting plugs, and taps are parts of a quick-disconnect system dedicated to machine safety. GuardLink™ taps connect safety input devices to a GuardLink system, a safety-based communications protocol that links safety to The Connected ...