Pilz 24 V dc Safety Relay Dual Channel With 2 Safety Contacts Compatible With Safety Switch/Interlock

  • RS-stocknr. 245-1905
  • Fabrikantnummer 774500
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

PNOZ XV2 Safety Relay, Adjustable Time Delayed

The PNOZ XV2 range of safety relays from PILZ offers you safety and performance of a top branded safety relay all in one. The PNOZ XV2 offers you different modes of operation such as single or dual channel switches. Suitable for several different applications which are listed below.

Features and benefits:

• DIN rail mounted with screw terminals
• 2 instantaneous delay-on re-energised safety contacts
• LED operating voltage displayed alongside switching psitions and also the reset circuit
• Connections built in for safety limit switches, e-stops and more
• Single or dual channel operation
• Simple and fast wiring saving you time, effort and money long term
• Save costs when exchanging units (there’s no need to rewire therefore you should eliminate potential wiring errors).
• Electromechanical, potential-free

Safety features

• The circuit is redundant with built-in self-monitoring.
• The safety function remains effective in the case of a component failure.
• The correct opening and closing of the safety function relays is tested automatically in each on-off cycle.
• International certification
• Faster commissioning and simple wiring through units with plug-in terminals
• High plant availability and short downtimes thanks to a convenient diagnostic options on the device

Applications

• E-STOP pushbuttons
• Safety gate limit switches
• Reset buttons

Technical safety parameters

• EN 60947-5-1
• EN 60204-1
• VDE 0113-1

Standards

EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1.

Approvals

CE, cULus Listed, TÜV, KOSHA, CCC.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 2
Function Safety Switch/Interlock
Safety Contacts 2
Range PNOZ X
Reset Method Automatic, Manual, Monitored
Terminal Type Screw
Length 87mm
Depth 121mm
Width 45mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
63 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
296,62
(excl. BTW)
358,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
296,62 €
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...
Safety relays for emergency stop circuits as per ...
Description:
Safety relays for emergency stop circuits as per the Machines directives and EN 60204 and EN 292 standardsCabling on 1 or 2 channelsDisplay LEDs on input channels 1 and 2Fitted with a return loop for self-monitoring of external relays or ...
The PNOZ X1 series from PILZ is a ...
Description:
The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner. • Specially designed for two handed control/operation. The P2HZ series will not ...