Pilz 24 V ac/dc Safety Relay Dual Channel With 2 Safety Contacts Compatible With Safety Switch/Interlock

  • RS-stocknr. 239-1055
  • Fabrikantnummer 774306
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PILZ PNOZ X1 Safety Relay, Dual Channel

The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner.

Features and benefits

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Several connection options are available for ESTOP pushbuttons, Safety gates & reset buttons.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors
• The safety function will remain effective in the case of a component failure
• This unit has an electronic fuse.
• The correct opening and closing of your safety function relays is tested automatically in each of the on/off cycles.

Safety features

• The circuit is redundant with built in self-monitoring

Applications

• Emergency stop buttons
• Safety curtains

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Standards

EN 60947-5-1, EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1.

Approvals

CE, cULus Listed, TÜV, KOSHA, CCC.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V ac/dc
Number of Channels 2
Function Safety Switch/Interlock
Safety Contacts 2
Range PNOZ X
Reset Method Automatic, Manual
Terminal Type Screw
Depth 121mm
Length 87mm
Width 22.5mm
336 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
144,40
(excl. BTW)
174,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
144,40 €
Related Products
Each miniTwin stick contains both the sender and ...
Description:
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender ...
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
Safety relay for two-handed controlsDuring dangerous movements, the ...
Description:
Safety relay for two-handed controlsDuring dangerous movements, the relay requires the operator to keep both hands out of the danger zoneApplications: mechanical presses, hydraulic presses, safety control circuitsRemovable terminals with connection via spring terminalsDisplay LEDs for relay statusDIN rail ...
Single or dual channel cabling with short-circuit detectionChoice ...
Description:
Single or dual channel cabling with short-circuit detectionChoice of self-monitoring or automatic resetDisplay LEDs for status of channels 1 and 2, input circuits, power supply voltage and resetReturn loop for monitoring external contactors2 solid state outputs.