Miller By Honeywell Front, Rear Attachment Stretchable Safety Harness

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SK
Productomschrijving

PSS 2 Point Titan Harness

PSS 2 point Titan harness is a perfect for all as it is a one size harness. The 2 point harness is complete with a dorsal D-ring and frontal webbing loops including fast release buckles and adjustable leg straps.

FEATURES and BENEFITS:
One size fits all
Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Includes fast release buckles made from galvanised steel
Weight 0.5 kg
Temperature range -30°C to +50°C
Static test 15 KN

Standards

EN 361

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specificaties
Kenmerk Waarde
Harness Attachment Point Front, Rear
Style Harness
Harness Size Universal
Adjustable Shoulder Straps Yes
Belt Included No Belt
Adjustable Leg Straps Yes
Adjustable Straps Chest, Leg
Buckle Type Pass Through
Stretchable Harness Yes
Hi-Vis No
Reflective No
Padding None
Harness Colour Blue
Weight Capacity 100kg
Fastener Material Steel
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
49,93
(excl. BTW)
60,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
49,93 €
Related Products
Miller kernmantel forked restraint lanyard complete with one ...
Description:
Miller kernmantel forked restraint lanyard complete with one aluminium twist lock karabiner and two GO60 aluminium scaffold hooks. The kernmantel is a new design and made with a light green rope with black stripes. The colours making the rope visible ...
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...
2-point full body harnessWith one dorsal attachment D-ring ...
Description:
2-point full body harnessWith one dorsal attachment D-ring and front textile loops for fall arrestAdjustable leg strapsParachute BuckleSit StrapPolyester webbing 44 mmBreaking strength 23 kNWeight 875 gEN 361:2002; CE.
2-point full body harnessWith one dorsal attachment D-ring ...
Description:
2-point full body harnessWith one dorsal attachment D-ring and front textile loops for fall arrestChest, shoulder and leg straps adjustableFor all sizes up to a weight of 136 Kg Parachute BuckleSit StrapPolyester webbing 44 mmBreaking strength 23 kNWeight 1155 g. ...