Hengstler Incremental Encoder 500 ppr 6000rpm Solid 10 → 30 V dc

  • RS-stocknr. 260-3768
  • Fabrikantnummer RI32-O/500ER.11KB
  • Fabrikant Hengstler
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

RI32 Miniature

Low torque/high efficiency with ball bearings

Note

Mounting plate 260-3998 is only suitable for the Hollow Shaft type encoders such as 260-3948, 291-4399 etc.

//media.rs-online.com/t_line/LD260371-01.gif
//media.rs-online.com/t_line/LF260371-99.gif

Hengstler

Radial cable termination
Alarm, A, B, N output
Encoders: OptoAsic technology for greater reliability
Pulse shape: Square wave, 1:1 duty cycle

Specificaties
Kenmerk Waarde
Pulses Per Revolution 500
Encoder Technology Incremental
Maximum Revolutions 6000rpm
Output Signal Type Push Pull
Shaft Type Solid
Supply Voltage 10 → 30 V dc
Shaft Diameter 6mm
IP Rating IP40
Overall Height 27mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Series RI32
Switching Frequency 200 kHz
43 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 169,95 €
160,49
(excl. BTW)
194,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
160,49 €
Related Products
Multibus technology encoders that link an absolute encoder ...
Description:
Multibus technology encoders that link an absolute encoder to a network interface. The two parts are separte and can be split. The housings ensure that the encoder is compatible with all networks.Resolution programmable up to 8192 steps per turn and ...
Incremental rotary encoders. Miniature incremental encoders for detecting ...
Description:
Incremental rotary encoders. Miniature incremental encoders for detecting angles, direction of rotation and speed measurements.Resolution up to 1024 pulses.Casing diameter: 24 mm.Radial output on 1 m cable.Spring and shoulder screw mounting.
Range of opto-electronic, compact encoders with NPN and ...
Description:
Range of opto-electronic, compact encoders with NPN and PNP-compatible outputs.These encoders record and measure movement, lengths, angles, speeds of rotation etc.They are particularly effective when used in conjunction with a tachometer to measure speed.Output signal on Darlington FET transistor.Screw ...
Description:
The WDG 40 A is a robust, small and cost-effective rotary transducer. It can be used wherever precise recordings of paths, positions or speeds are required.