Needle Roller Bearing TLA69Z, 6mm I.D, 10mm O.D

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Drawn Cup Needle Roller Bearing

Small radial section height makes this bearing type invaluable in appliactions where space is at a premium
Stands very high loads
Efficient at high speeds
Large grease reservoir

//media.rs-online.com/t_line/L755615-01.gif
//media.rs-online.com/t_line/LF755615-01.gif
Specificaties
Kenmerk Waarde
Inside Diameter 6mm
Outside Diameter 10mm
Roller Bearing Type Needle
Race Width 9mm
Bore Type Parallel
Static Load Rating 2.45kN
Number of Rows 1
Dynamic Load Rating 2.49kN
End Type Open
Maximum Speed - Grease 33000rpm
Maximum Speed - Oil 50000rpm
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
240 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
2,83
(excl. BTW)
3,42
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
2,83 €
5,66 €
10 - 18
2,745 €
5,49 €
20 +
2,66 €
5,32 €
*prijsindicatie
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
Drawn cup needle roller bearings with open ends ...
Description:
Drawn cup needle roller bearings with open ends and with closed end are needle roller bearings with a very small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a ...