Needle Metric Roller Bearing 6mm I.D, 10mm O.D

  • RS-stocknr. 146-9290
  • Fabrikantnummer HK 609
  • Fabrikant RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

RS Pro Needle Metric Roller Bearing

The RS Pro needle metric roller bearing, fits to dimensions 06x10x09.

Specificaties
Kenmerk Waarde
Inside Diameter 6mm
Outside Diameter 10mm
Roller Bearing Type Needle
Race Width 9mm
Bore Type Parallel
Material Steel
Static Load Rating 2.7kN
Cage Material Steel
Number of Rows 1
Roller Material Steel
Dynamic Load Rating 2.81kN
End Type Open
Reference Speed 20000rpm
Limiting Speed 22000rpm
Maximum Speed - Oil 32000rpm
Fatigue Limit Load 0.285kN
Maximum Speed - Grease 20000rpm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
2,67
(excl. BTW)
3,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
2,67 €
5 - 9
2,61 €
10 +
2,56 €
Related Products
SKF needle roller thrust bearings can support heavy ...
Description:
SKF needle roller thrust bearings can support heavy axial loads, are insensitive to shock loads and provide stiff bearing arrangements which require a minimum of axial space. Single direction bearings and can only accommodate axial loads acting in one directionParticularly ...
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
These bearings are the most basic and most ...
Description:
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...