- RS-stocknr.:
- 506-286
- Fabrikantnummer:
- BS2-2217-2CS
- Fabrikant:
- SKF
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/05/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 372,24
(excl. BTW)
€ 450,41
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 372,24 |
5 - 9 | € 360,75 |
10 + | € 348,99 |
- RS-stocknr.:
- 506-286
- Fabrikantnummer:
- BS2-2217-2CS
- Fabrikant:
- SKF
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
SKF Spherical Roller Bearings
SKF Spherical Roller Bearings offer an attractive combination of design features, which make them irreplaceable in many demanding applications.
Self-aligning - allows misalignment between shaft and housing without increase of friction and without reduction of bearing life
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design
Spherical Roller Bearings with integral seals BS2 Series offer additional benefits:
Protection against contamination - SKF sealed spherical roller bearings are especially suited for bearing positions where, because of limited space or for cost reasons, effective external seals cannot be provided
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 85mm |
Outside Diameter | 150mm |
Roller Bearing Type | Spherical |
Race Width | 44mm |
Bore Type | Parallel |
Static Load Rating | 325kN |
Number of Rows | 2 |
Dynamic Load Rating | 285kN |
End Type | Sealed |
Limiting Speed | 1100rpm |
Fatigue Limit Load | 34.5kN |