LDK Carbon Steel Rod End, 19.05mm Bore Size, 95.25mm Long , 3/4 in Thread Size, UNF Thread Standard Male

  • RS-stocknr. 185-2576
  • Fabrikantnummer POSB12
  • Fabrikant LDK
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated
Body: Carbon steel,clear Zinc plated.
Race: Brass
Sliding contact surfaces: Steel/Brass

Specificaties
Kenmerk Waarde
Bore Size 19.05mm
Dynamic Load Rating 27kN
Static Load Rating 36.6kN
Overall Length 95.25mm
Material Carbon Steel
Connection Thread Size 3/4 in
Connection Thread Standard UNF
Connection Gender Male
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
37,47
(excl. BTW)
45,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
37,47 €
5 - 9
35,92 €
10 +
35,19 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Rod Ends with male thread and PTFE liner. ...
Description:
Rod Ends with male thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.