LDK Carbon Steel Rod End, 19.05mm Bore Size, 95.25mm Long , 3/4 in Thread Size, UNF Thread Standard Female

  • RS-stocknr. 185-2568
  • Fabrikantnummer PHSB12L
  • Fabrikant LDK
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass

Specificaties
Kenmerk Waarde
Bore Size 19.05mm
Dynamic Load Rating 27kN
Static Load Rating 49.6kN
Overall Length 95.25mm
Material Carbon Steel
Connection Thread Size 3/4 in
Connection Thread Standard UNF
Connection Gender Female
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
38,30
(excl. BTW)
46,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
38,30 €
5 - 9
36,85 €
10 +
36,02 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Rod Ends with female threads regreasable through the ...
Description:
Rod Ends with female threads regreasable through the housing with flush type grease fitting.
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.