Durbal M10 x 1.5 Female Rod End, 10mm Bore Size, 57mm Long , M10 Thread Size, Metric Thread Standard Female

  • RS-stocknr. 185-0123
  • Fabrikantnummer BRF 10-00-501
  • Fabrikant Durbal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing.

Female thread greasable, low maintenance, shields adapter.

Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanized
Inner ring: ball bearing steel, hardened, superfine ground
Lubrication: Polyrex EP2 or soap complex
Temperature range -20 °C to +120 °C
Bearing clearance: 15 - 40 μm radial

Specificaties
Kenmerk Waarde
Connection Size M10 x 1.5 Female
Bore Size 10mm
Dynamic Load Rating 4.5kN
Static Load Rating 1.5kN
Overall Length 57mm
Material Forged Steel
Connection Thread Size M10
Connection Thread Standard Metric
Maximum Operating Temperature +120°C
Minimum Operating Temperature -20°C
Connection Gender Female
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
87,35
(excl. BTW)
105,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
87,35 €
5 +
83,83 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: AISI 52100 bearing Steel, heat treated, HRC56 ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.