Durbal Rod End, 18mm Bore Size, 95mm Long , M18 Thread Size, Metric Thread Standard Male

  • RS-stocknr. 185-0106
  • Fabrikantnummer BRM 18-00-501
  • Fabrikant Durbal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing.

Male thread greasable, low maintenance, shields adapter.

Rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
Inner ring: ball bearing steel, hardened, superfine ground
Lubrication: Polyrex EP2 or soap complex
temperature range -20 °C to +120 °C
Bearing clearance: 15 - 40 μm radial

Specificaties
Kenmerk Waarde
Bore Size 18mm
Dynamic Load Rating 7.1kN
Static Load Rating 2.9kN
Overall Length 95mm
Material Forged Steel
Connection Thread Size M18
Connection Thread Standard Metric
Maximum Operating Temperature +120°C
Minimum Operating Temperature -20°C
Connection Gender Male
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
155,56
(excl. BTW)
188,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
155,56 €
5 +
149,35 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.