Durbal M12 x 1.75 Male Rod End, 12mm Bore Size, 70mm Long , M12 Thread Size, Metric Thread Standard Male

  • RS-stocknr. 185-0072
  • Fabrikantnummer BRTM 12-00-501
  • Fabrikant Durbal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing.

Male thread greasable, low maintenance, shields adapter.

Rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
Inner ring: ball bearing steel, hardened, superfine ground
Lubrication: Polyrex EP2 or soap complex
temperature range -20 °C to +120 °C
Bearing clearance: 15 - 30 μm radial

Specificaties
Kenmerk Waarde
Connection Size M12 x 1.75 Male
Bore Size 12mm
Dynamic Load Rating 10.3kN
Static Load Rating 6.6kN
Overall Length 70mm
Material Forged Steel
Connection Thread Size M12
Connection Thread Standard Metric
Maximum Operating Temperature +120°C
Minimum Operating Temperature -20°C
Connection Gender Male
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
166,74
(excl. BTW)
201,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
166,74 €
5 +
160,01 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Rod Ends with male thread and PTFE liner. ...
Description:
Rod Ends with male thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: AISI 52100 bearing Steel, heat treated, HRC56 ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.