VP Connector Rocker Switch Connector for use with Raised Bezel Only

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

V Series Rocker Switch Accessories

A range of accessories are available to suit the Carling Technologies V Series Contura rocker switches. These include mounting panels, actuator removal tools which when used can accommodate most of any design needed.

Carling Technologies® Rocker Switches

Specificaties
Kenmerk Waarde
Accessory Type VP Connector
For Use With Raised Bezel Only
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,86
(excl. BTW)
1,04
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 +
0,86 €
43,00 €
*prijsindicatie
Related Products
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
Single pole 10A/24Vdc rocker switch cases, fitted with ...
Description:
Single pole 10A/24Vdc rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsIlluminated version has 24V red LED's, with up to 6 terminalsSuitable actuators should be ordered separately (see typically 507-267 and range)Rear crimp connector housing 507-560 also available, to facilitate ...
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and ...
Description:
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and HexadecimalModules may be separated by spacers and assembled between cheeksH 24mm, W 7.62mm, D 32mmCheeks and spacers available separatelyCut out, 22.5 by [(no. of switches x 7.62) x (no. of spacers x ...
Display:10 positions 0 → 9 with BCD or ...
Description:
Display:10 positions 0 → 9 with BCD or decimal outputs16 positions 0 → 9, A → FFront panel mounting using "plug in" side tabs.Optional PCB solder connector.